| Configuration Notes |
: |
* Mfgr's System P/N's: AU082US, AU379US, FL845UA, FL846UA, FL847UA, FL852UA, FL867UT, FL868UT, FL869UT, FL870UT, FL871UT, FL872UT, FL873UT, FL892UA, FL893UA, FL894UA, FL895UA, FL896UA, FL897UA, FL898UA, FL903UT, FW863AV, FX551AV, KK532EA, KK541EA, KK542EA, KK549ET, KK550ET, KK551ET, NZ258PA, NZ964LA, NZ965LA, NZ966LA, NZ968LA, NZ969LA, VD087UC
* MODULES MAY BE INSTALLED ONE AT A TIME, however, for optimum performance install modules across all three memory channels for triple channel memory interleaving.
* If 4GB is installed, the recognized memory may be reduced to 3.5GB or less (depending on system configuration and memory allocation).
* A 64-bit operating system is required to utilize more than 4GB of memory.
* Registered DIMMs on Z600 requires a systemboard with the C2 revision of the Intel 5520 chipset. You can determine the revision of the chipset by using the BIOS setup menu to access the "Boot Block Date" from the "System Information Menu". All systems with a B3 chipset revision will have a "1/30/09" date and systems with a C2 chipset revision will have a "01/07/10" date. An alternative method of determining the chipset revision is by the PCA ID, reported by the Performance Advisor under "System Configuration" and "Baseboard ID". All systems with a B3 chipset revision will have the ID "0AE8h" and all systems with a C2 chipset revision will have the ID "0B54h".
* In order to use the 2.5-inch SSD option an HP drive carrier part number 654540-001-AX is required.
* The 2.5-inch hard drive is mounted in a 2.5 to 3.5-inch hard drive carrier which is then mounted in the internal hard drive carrier on this computer. |
